Need help running OpenRA
- Falx Omega
- Posts: 3
- Joined: Fri Oct 28, 2022 9:54 am
Need help running OpenRA
Hello, I installed the latest OpenRA build days ago and I've been unable to run the game, I read the FAQ and the error I'm getting it's the Graphics.log but since I don't have discord I stalled I'm not sure what needs to be done to fix this, any help will be appreciated, thank you (needless to say I'm a total newbie on this)
Re: Need help running OpenRA
Hi. Can you share the contents of your graphics.log? It is in the same folder as the exception log.
- Falx Omega
- Posts: 3
- Joined: Fri Oct 28, 2022 9:54 am
Re: Need help running OpenRA
Here it is, I'm using a windows 7 laptop with Open GL 3.0 by the way
- Attachments
-
- OPENRACMON_1.png (23.51 KiB) Viewed 2768 times
- Falx Omega
- Posts: 3
- Joined: Fri Oct 28, 2022 9:54 am
Re: Need help running OpenRA
Does anyone has had a similar problem or is that OpenRA has a bit more requirements than the original? CNCNet runs perfectly fine on my end so I don't get what's wrong
I'm using an old laptop Acer aspire One windows 7 64x
I'm using an old laptop Acer aspire One windows 7 64x
Re: Need help running OpenRA
Windows 7 might indeed be a problem. The error message indicates that the game can't create a window using OpenGL. If you are lucky this is due to a buggy driver and can be solved by updating graphics drivers. I'd recommend trying viewtopic.php?p=312766#p312766 next:
If that does not help I fear we are out of luck, sorry.abcdefg30 wrote: ↑Sun Mar 07, 2021 11:35 pmSorry, it could very well be that your graphics card is too old.
The only thing you can try is settingin your settings.yamlCode: Select all
Graphics: GLProfile: Legacy
(see https://github.com/OpenRA/OpenRA/wiki/Settings#location and https://github.com/OpenRA/OpenRA/wiki/S ... #glprofile )
-
- Posts: 4
- Joined: Thu Jan 12, 2023 1:53 am
Re: Need help running OpenRA
I am using ios device and really this error occurs.Falx Omega wrote: ↑Fri Nov 04, 2022 2:27 amDoes anyone has had a similar problem or is that OpenRA has a bit more requirements than the original? CNCNet runs perfectly fine on my end so I don't get what's wrong penalty kick online
I'm using an old laptop Acer aspire One windows 7 64x