Vacuum cleaners are an essential tool for any household to keep the floor free of dust and pollen. Good vacuum brands offer the most durable and reliable models that can last a lifetime. However, most vacuums require regular maintenance and cleaning procedures to avoid technical problems. A lot of users have experienced the problem of a vacuum that won't turn on. There are common issues with this problem, and we are here to help you get it fixed or you can check Top vacuum cleaners reviews to have more information.
Why Won’t Your Vacuum Turn On?
The first thing you should check is if your corded vacuum is plugged in. Next, you should make sure the power outlet is providing electricity. Access to the wiring and cable connections, ensure that the switch is on. A loose switch can prevent your vacuum from turning on, and your vacuum cannot perform any cleaning tasks.
Check if your vacuum is overheating
When we're cleaning for too long, the device can be overheating. The machine might shut down by a thermal cut-out. A great thing to do is to stop cleaning for a few minutes for the vacuum to cool down before you can start again.
Check your motor
If the motor is working properly, the vacuum is likely to shut down. An overused canister vacuum can cause blocked filters and damage the motor. In that case, you should consider getting a new motor or buy a new one from the The Best Vacuum Cleaners.
Check your vacuum bag
If you purchased a bagged vacuum, your vacuum wouldn't turn on because the bag is full. Make sure you empty the bag often and replace it with a new one.
Check the vacuum's power cord
A damaged cord can cause your vacuum to shut down. You should check if there's any split in the cord, and if there is, you should change the power cord immediately for safety reasons. Vacuuming with a damaged power cord can lead to severe accidents. Or you can consider switching to cordless vacuums, which offer more versatility with rechargeable lithium-ion batteries.
- The best vacuum cleaner on the market (cordless): Dyson V11
- The best rated vacuum (corded): Shark Navigator Lift-Away NV352
Why Does Your Vacuum Spit Out Dust?
Your vacuum is spitting out dust because the machine is trying to suck in large debris such as a coin or large mess, which might block the hose. To unblock the pipe and nozzle, you should unplug the vacuum from the power outlet. Secondly, you should disconnect the hose from the main unit.
Try to feel where the clogged areas are by squeezing it with your hand across the hose. You can gently remove the hard clogged areas by using a wire or slim broom handle. Reattach the pipe to the vacuum and try turning the machine on again. These tips are applicable for canister vacuums and bagged vacuums.
Disintegrated filters can also lead to dust being blown out into the air. You should check to make sure it's not broken. Replace that damaged filter with a new one immediately to avoid polluted dirt from escaping outside.
We hope that our guide can help you fix the broken vacuum machine that won't turn on or burst out dust. Any further issues, contact your manufacturer for more instructions. If you’re considering buying a new vacuum, check out our best vacuum cleaner reviews.
